Our Ruthmann T510 HF crane truck provides an elevated work platform of an incredible 51 metres working height with up to 33 metres outreach. This model is prepared to deliver efficiency on even the most challenging projects.
Working up to 51 metres above and 10 metres below ground level possible
Work platform lift limit of 49m, equipped with lifting arms to safely lift a combined weight of 600kg
Capable of lateral reach up to 33m with 100kg basket load
180 degrees swivelling angle of upper boom to support multiple scenarios and angle of approach
Total vehicle length of 10.4m
Generous platform dimensions and 600kg load capacity
Coopers Gap Wind Farm is 250 km north-west of Brisbane and will be one of Australia's largest wind farms. With 123 turbines this renewable energy project can power approximately 264,000 average Australian homes. Skydeck Australia were responsible for assisting in the construction of approx. 45km of 132KV transmission lines. Expected completion is 2020. Construction cost approx. $850M
A rotation angle of the working basket of 440° is possible with the highflex working basket feature of the HEIGHT performance-models with the suffix HF. This gives operators the advantage to telescope over objects and to then adjust the working basket position completely as required, even in a lowered or bent working basket boom position.
NSW power authority project for lattice tower replacement where high voltage lines were redirected under outage